Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 12

Passo 12
The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.
Install the bottom adhesives
  • The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.

  • Read through this step and the next four steps before you attempt the procedure.

  • Grasp the red pull tab on strip 25 and pull to separate about 2 inches (5 cm) of white backing from the strip.

次の手順では、右下の接着ストリップ(ストリップ番号25)を装着する方法を示しています。これは、マイクと位置合わせが必要な突起が含まれています。

作業を始める前に、この手順と次の4つの手順を先にお読みください。

ストリップ番号25の赤いプルタブをつかみ、ストリップから約5 cmの白い裏張りを剥がします。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.