Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 12

Passo 12
The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.
Install the bottom adhesives
  • The next few steps will show you how to install the bottom right adhesive strip (strip 25), which includes a notch that must be aligned with the microphone.

  • Read through this step and the next four steps before you attempt the procedure.

  • Grasp the red pull tab on strip 25 and pull to separate about 2 inches (5 cm) of white backing from the strip.

Les prochaines étapes vous montreront comment installer la bande adhésive en bas à droite (bande 25), qui comprend une encoche qui doit être alignée avec le microphone.

Lisez cette étape et les quatre étapes suivantes avant de tenter la procédure.

Saisissez la languette rouge sur la bande 25 et tirez pour décoller environ 5 cm de film de protection de l'adhésif.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.