Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 28

Passo 28
To ensure a strong bond, carefully tip the iMac flat on its back (with the screen facing straight up) and press carefully but firmly around all four edges of the display. Remove the tape securing the display to the rear enclosure.
  • To ensure a strong bond, carefully tip the iMac flat on its back (with the screen facing straight up) and press carefully but firmly around all four edges of the display.

  • Remove the tape securing the display to the rear enclosure.

  • Check the display after 24 hours to make sure that it is not loose on the iMac.

しっかりと固定するには、iMacの背面を慎重に平らに傾けて(スクリーンを真上に向けて)、ディスプレイの四隅全てをしっかりと押します。

ディスプレイをリアエンクロージャーに固定しているマスキングテープを剥がします。

24時間後にディスプレイの状態をチェックして、iMacから緩んでいないか確認します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.