Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 10

Passo 10
Use a Phillips #0 screwdriver to remove two screws. Unplug the wire by pulling firmly.
  • Use a Phillips #0 screwdriver to remove two screws.

  • Unplug the wire by pulling firmly.

  • Lift the metal brace with your fingers to expose the motherboard.

Entferne zwei Schrauben mit einem Kreuzschlitzschraubendreher Nr. 0.

Ziehe den Draht durch festes Ziehen heraus.

Hebe die Metallstrebe mit deinen Fingern an, um das Motherboard freizulegen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.