Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive. If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.
Separate the trackpad cable adhesive
  • Carefully slide an opening pick under the trackpad cable to separate the adhesive securing it to the upper case.

  • If you have difficulty separating the adhesive, heat it slightly with an iOpener or hair dryer to soften the adhesive.

Schiebe behutsam ein Plektrum unter das Trackpadkabel und löse es aus der Klebeverbindung zum oberen Gehäuse.

Wenn sich der Kleber nicht leicht auftrennen lässt, dann erwärme das Kabel ein wenig mit einem iOpener oder einen Haartrockner, um den Kleber aufzuweichen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.