Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers. Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker. Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
Remove the right speaker adhesive
  • Use a pair of tweezers to lift up the black adhesive pull tab at the bottom of the right speaker, enough so you can grab it with your fingers.

  • Grab the adhesive strip pull tab and slowly and carefully pull the adhesive strip out from under the speaker.

  • Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.

  • If the adhesive strip breaks, leave it in and proceed to the next step.

ピンセットを使用して、右側スピーカーの下部にある黒い接着プルタブを指で掴める程度に持ち上げます。

接着ストリップのプルタブをつかみ、ゆっくりと慎重に接着ストリップをスピーカーの下から引き抜きます。

接着ストリップの角度をできるだけラップトップに対して平行に保ちます。 ケース内部のパーツに引っ掛けないようにご注意ください。

接着ストリップが壊れた場合、そのままにして、次の手順に進みます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.