Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.
Remove the screws securing the lower case
  • Before starting this procedure, you should disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide to disable Auto Boot.

  • If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.

  • Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.

  • Use a P5 driver to remove the following screws:

  • Two 7.9 mm screws

  • Two 7.1 mm screws

  • Six 2.6 mm screws

Prima di iniziare questa procedura devi disabilitare la funzionalità Auto Boot del tuo Mac. Auto Boot accende il tuo Mac quando apri il coperchio con lo schermo può attivarsi accidentalmente in fase di smontaggio. Usa questa guida oppure segui le istruzioni abbreviate qui sotto per disabilitare Auto Boot.

Prima di iniziare, spegni completamente e stacca dall'alimentazione il tuo MacBook Pro. Richiudi il display e ribalta il laptop mettendolo a faccia in giù.

Usa un cacciavite pentalobe P5 per rimuovere le viti seguenti:

Due viti da 7,9 mm

Due viti da 7,1 mm

Sei viti da 2,6 mm

[title] Remove the screws securing the lower case
[* icon_note] Before starting this procedure, you mustshould disable your Mac's '''Auto Boot''' feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] or follow the abbreviated instructions below to disable Auto Boot.
[* black] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.
[* icon_note] Before starting this procedure, you mustshould disable your Mac's '''Auto Boot''' feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. [guide|110034|Use this guide|new_window=true] or follow the abbreviated instructions below to disable Auto Boot.
[* black] If your MacBook is running Big Sur v11.1 or later, disabling Auto Boot may not work. You can proceed normally, but make sure to disconnect the battery as soon as you're inside.
[* icon_caution] Completely power off and unplug your MacBook Air before you start. Close the display and flip the entire laptop upside-down.
[* black] Use a P5 driver to remove the following screws:
[* red] Two 7.9 mm screws
[* orange] Two 7.1 mm screws
[* yellow] Six 2.6 mm screws

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.