Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Put a little liquid flux on the solder that was left on the solder pads. Using some desoldering braid, sometimes also called desoldering wick, remove the old solder.
  • Put a little liquid flux on the solder that was left on the solder pads.

  • Using some desoldering braid, sometimes also called desoldering wick, remove the old solder.

  • Using isopropyl alcohol and an acid brush, clean the flux residue off the board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.