Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Press the nib marked in green inside and slightly lift the housing from the back plate shown in the first image here. The housing can be removed by lifting and rotating it around the catches on the lower front side of the device highlighted in purple. Finally, it is shifted slightly to the front out of those catches.
  • Press the nib marked in green inside and slightly lift the housing from the back plate shown in the first image here.

  • The housing can be removed by lifting and rotating it around the catches on the lower front side of the device highlighted in purple. Finally, it is shifted slightly to the front out of those catches.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.