Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Using the screwdriver, remove the 11 screws from the main PCB board and the battery. Lift and remove the battery as indicated in the second image. Using the opening tool, detach all of the flex connectors as shown in the third image.
Unscrew and detach flat-ribbon cables
  • Using the screwdriver, remove the 11 screws from the main PCB board and the battery.

  • Lift and remove the battery as indicated in the second image.

  • Using the opening tool, detach all of the flex connectors as shown in the third image.

  • Do not tear the 8 cables when taking out the flex connectors.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.