Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 9

Passo 9
Slide a pick along the left edge of the phone to slice through the rear glass adhesive. Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable. Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable.
  • Slide a pick along the left edge of the phone to slice through the rear glass adhesive.

  • Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable.

Schuif je plectrum langs de linkerzijde van de telefoon om de lijm onder de glazen achterkant door te snijden.

Zorg dat je je plectrum niet verder dan ongeveer 1 cm langs de rand van de glazen achterkant inbrengt. Zo voorkom je schade aan de vingerafdruksensorkabel.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.