Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 9

Passo 9
Slide a pick along the left edge of the phone to slice through the rear glass adhesive. Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable. Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable.
  • Slide a pick along the left edge of the phone to slice through the rear glass adhesive.

  • Take care to not insert the pick more than ~1 cm past the edge of the rear glass to avoid damaging the fingerprint sensor cable.

Schiebe das Plektrum entlang des linken Randes des Handys zum Trennen des Klebers, der die Glas-Rückabdeckung sichert.

Achte darauf, dass du das Plektrum nicht tiefer als etwa 1 cm unter die Kante des Telefons schiebst, damit das Kabel des Fingerabdrucksensors nicht beschädigt wird.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.