Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
After the screws are removed from the top and bottom, you will find that the entire base is still held down by small clips all around the laptop. I found it easiest to start from the front and work my way around, using a Flathead screwdriver to pry it apart from the palm rest.
  • After the screws are removed from the top and bottom, you will find that the entire base is still held down by small clips all around the laptop.

  • I found it easiest to start from the front and work my way around, using a Flathead screwdriver to pry it apart from the palm rest.

  • The second picture shows the heatsink for the Intel GMA 3000 Graphics chip located on the opposite side of the motherboard to the touchpad. On the top of it is a sticky thermal pad that helps to distribute heat to the base.

  • That thermal pad on the heatsink has a double function, in that it is stuck to the base and would need a little effort to separate them from each other.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.