Salta al contenuto principale

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 2guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Using the plastic Spudger, remove the ZIF connector connecting the power button board to the motherboard. Remove the connector by popping the cap up on top of the connector and sliding it out of its slot. This ZIF ribbon is glued to the middle of the fan and will not come off. This ZIF ribbon is glued to the middle of the fan and will not come off.
  • Using the plastic Spudger, remove the ZIF connector connecting the power button board to the motherboard. Remove the connector by popping the cap up on top of the connector and sliding it out of its slot.

  • This ZIF ribbon is glued to the middle of the fan and will not come off.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.