Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Olandese

Traduzione in corso passo 7

Passo 7
Using the flat end of the plastic Spudger, remove the ZIF connector attaching the volume button and headphone jack to the motherboard. This ZIF ribbon is glued to the middle of the battery. You do not need to separate this ribbon from the battery in order to remove the battery from the device. You only need to unclip it at both ends.
  • Using the flat end of the plastic Spudger, remove the ZIF connector attaching the volume button and headphone jack to the motherboard.

  • This ZIF ribbon is glued to the middle of the battery. You do not need to separate this ribbon from the battery in order to remove the battery from the device. You only need to unclip it at both ends.

Gebruik het platte einde van je spudger om de ZIF-aansluiting die de volumeknop en hoofdtelefoonjack met het moederbord verbindt los te koppelen.

De lintkabel van deze ZIF-aansluiting is op het midden van de batterij gelijmd. Je hoeft de lintkabel niet van de batterij te verwijderen om de batterij te kunnen verwijderen. Zorg echter wel dat je de kabel aan beide uiteinden loskoppelt.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.