Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Spagnolo

Traduzione in corso passo 7

Passo 7
Using the flat end of the plastic Spudger, remove the ZIF connector attaching the volume button and headphone jack to the motherboard. This ZIF ribbon is glued to the middle of the battery. You do not need to separate this ribbon from the battery in order to remove the battery from the device. You only need to unclip it at both ends.
  • Using the flat end of the plastic Spudger, remove the ZIF connector attaching the volume button and headphone jack to the motherboard.

  • This ZIF ribbon is glued to the middle of the battery. You do not need to separate this ribbon from the battery in order to remove the battery from the device. You only need to unclip it at both ends.

Utilizando el extremo plano del spudger de plástico, retire el conector ZIF que une el botón de volumen y la toma de auriculares a la placa madre.

Esta cinta ZIF está pegada al centro de la batería. No es necesario separar esta cinta de la batería para retirar la batería del dispositivo. Sólo es necesario desengancharla en ambos extremos.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.