Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
With the case and battery removed from the midframe, begin removing all cables attached to the motherboard. Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner. Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.
  • With the case and battery removed from the midframe, begin removing all cables attached to the motherboard.

  • Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner.

  • Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.

  • Proceed counterclockwise to the next cable and repeat. Small flex cable on the bottom won't need cable tensioner lifted, just carefully pull out.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.