Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver. These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them. These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.
  • Locate and remove the heat sink mounting screws using a #1 Phillips Screwdriver.

  • These screws will be tight as they hold a critical component onto the processor. You may need to use a little extra elbow grease to remove them.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.