Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
With the four screws unscrewed, the UMD Drive can be removed. Gently lift the drive from its housing. Make sure as to not damage the UMD ribbon cable (connecting it to the logic board) as you remove the drive.
  • With the four screws unscrewed, the UMD Drive can be removed. Gently lift the drive from its housing.

  • Make sure as to not damage the UMD ribbon cable (connecting it to the logic board) as you remove the drive.

  • This may be a good time to clean the laser head or any of the components inside the UMD Drive.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.