Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
With the UMD door off, locate and remove the four 4mm Phillips screws that hold in the UMD Drive in place. If you have not disconnected the UMD ribbon cable, do so now, as to not damage it when removing the drive.
  • With the UMD door off, locate and remove the four 4mm Phillips screws that hold in the UMD Drive in place.

  • If you have not disconnected the UMD ribbon cable, do so now, as to not damage it when removing the drive.

  • If you have not disconnected the UMD ribbon cable do so now, as to not damage it when removing the drive.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.