Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
add hot melt glue in these areas on the board and on the side of the connector. Add the cover first to understand where there is room for it in the cover.
add glue to connectors
  • add hot melt glue in these areas on the board and on the side of the connector.

  • Add the cover first to understand where there is room for it in the cover.

  • If connector is not glued, it is likely the charger will stop working again in the near future.

  • Ikea have been notified of this issue.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.