Aggiusta le tue cose Community Store

HP EliteBook x360 1040 G5 Austausch der Hauptplatine

Torna alla Guida
Inglese
Tedesco
Passo successivo

Traduzione in corso passo 1

Passo 1
HP Elitebook x360 1040 G5 Motherboard Replacement: passo 0, immagine 1 di 2 HP Elitebook x360 1040 G5 Motherboard Replacement: passo 0, immagine 2 di 2

  • With the battery removed, begin by removing the two coaxial connectors located near the hinge using an ESD-safe spudger.

  • To do this, slide the tip of the spudger under the wire until it is snug against the connector. Then, pry straight up from the board.

Wenn der Akku entfernt ist kannst du die beiden koaxialen Stecker in der Nähe des Scharniers entfernen. Du solltest einen ESD sicheren Spudger verwenden.

Schiebe die Spitze des Spudgers unter das Kabel bis sie den Konnektor berührt. Hebele danach etwas in senkrechter Richtung von der Hauptplatine nach oben.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.