Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Using a small Phillips screwdriver, remove the screw on the top right of the back of the camera. Remove the 4 screws on the bottom of the camera near the tripod socket Remove 2 screws on the side with the USB connector cover (one of the screws is underneath the cover)
  • Using a small Phillips screwdriver, remove the screw on the top right of the back of the camera.

  • Remove the 4 screws on the bottom of the camera near the tripod socket

  • Remove 2 screws on the side with the USB connector cover (one of the screws is underneath the cover)

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.