Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 22

Passo 22
The SCSI devices are mounted on sleds. The sled can hold 3.5 inch and 5.25 inch devices. Full-height devices can be accommodated but the bay above the bay in use will be inaccessible. To remove a sled, slide the green lever to the left.
  • The SCSI devices are mounted on sleds. The sled can hold 3.5 inch and 5.25 inch devices.

  • Full-height devices can be accommodated but the bay above the bay in use will be inaccessible.

  • To remove a sled, slide the green lever to the left.

  • This sled holds the system disk, a 10k RPM 9GB Quantum. Slow and small by today's standard, it is typical for late 90s technology.

  • The sled's power connection.

  • Bus 0 connection (single-ended)

  • Bus 1 connection (differential signaling)

  • The Device ID can be set through a switch on the front panel. This switch plugs into the disk.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.