Aggiusta le tue cose Community Store

Huawei Mate 10 Rückabdeckung austauschen

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Tedesco
Passo precedente Passo successivo

Traduzione in corso passo 7

Passo 7
Huawei Mate 10 Back Cover Replacement, Prep the phone for a new back cover: passo 0, immagine 1 di 2 Huawei Mate 10 Back Cover Replacement, Prep the phone for a new back cover: passo 0, immagine 2 di 2
Prep the phone for a new back cover

  • Before you install a replacement back cover, be sure to remove all traces of perimeter adhesive from the phone frame.

  • If you are re-using the back cover, carefully remove all traces of adhesive from the back cover.

  • The glass back cover is fragile and prone to cracking. Don't apply uneven pressure to the back cover as you clean.

  • You may pull up chunks of the cover's color coating as you remove the adhesive. To reduce the chances of this occurring, apply heat or high concentration isopropyl alcohol to the adhesive to weaken it.

Vorbereiten für die neue Rückabdeckung

Bevor du eine neue Rückabdeckung befestigst, musst du alle Kleberreste vom Rahmen entfernen.

Wenn du die alte Rückabdeckung wieder einbauen willst, musst du auch hier sorgfältig alle Kleberreste entfernen.

Die gläserne Rückabdeckung ist empfindlich und bricht leicht. Drücke beim Reinigen nicht ungleichmäßig auf die Rückabdeckung.

Beim Entfernen der Kleberreste können sich Stücke der Farbbeschichtung von der Rückabdeckung ablösen. Um das nach Möglichkeit zu vermeiden, solltest du sie erwärmen oder den Kleber mit hochkonzentriertem Isopropylalkohol schwächen.

[title] Prep the phone for a new back cover
[* icon_reminder] Before you install a replacement back cover, be sure to remove all traces of perimeter adhesive from the phone frame.
[* icon_reminder] If you are re-using the back cover, carefully remove all traces of adhesive from the back cover.
- [* icon_note] The glass back cover is fragile and prone to cracking. Do not apply uneven pressure to the back cover as you clean.
+ [* icon_note] The glass back cover is fragile and prone to cracking. Don't apply uneven pressure to the back cover as you clean.
[* black] You may pull up chunks of the cover's color coating as you remove the adhesive. To reduce the chances of this occurring, apply heat or high concentration isopropyl alcohol to the adhesive to weaken it.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.