Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
For this step, spin the printer around so the back is toward you. Remove the drain tube and the air vent tube from the ink absorber box. A spudger may be helpful. Clip the ends of the tubes so they won't leak.
Removing the tubes
  • For this step, spin the printer around so the back is toward you.

  • Remove the drain tube and the air vent tube from the ink absorber box. A spudger may be helpful.

  • Clip the ends of the tubes so they won't leak.

  • De-route the tubes from the holder.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.