Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Now that the side panels are removed, we can begin removing the camera's front bezel. First, remove the two small Phillips screws on the lens side of the camera.  These are identical to the screws we removed earlier
  • Now that the side panels are removed, we can begin removing the camera's front bezel.

  • First, remove the two small Phillips screws on the lens side of the camera. These are identical to the screws we removed earlier

  • Using a spudger or small flat-blade screwdriver, gently lift the metal tab on the other side of the camera so that it clears the nub on the chassis.

  • Push the front bezel forward just enough so that the tab does not snap back into place.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.