Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 6

Passo 6
After removing the seven screws in step five, the rear panel of the camera is ready to be removed. Gently rock the rear panel until it feels loose
  • After removing the seven screws in step five, the rear panel of the camera is ready to be removed.

  • Gently rock the rear panel until it feels loose

  • Starting from the bottom of the camera, lift the rear panel and hinge it towards the top of the camera. Once you reach a 45 degree angle, the top tabs should release and the rear panel will lift off freely.

  • Remove the camera's rear panel and set it aside. The LCD display and the control board are now exposed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.