Autosampler Battery Enclosure Assembly (For Old & New Versions)

Passo precedente Passo successivo

Traduzione in corso passo 9

Torna alla Guida

Inglese

Italiano

Passo 9

Autosampler Battery Enclosure Assembly (For Old & New Versions), Creating a 2-pin amphenol connector.: passo 0, immagine 1 di 3

Autosampler Battery Enclosure Assembly (For Old & New Versions), Creating a 2-pin amphenol connector.: passo 0, immagine 2 di 3

Autosampler Battery Enclosure Assembly (For Old & New Versions), Creating a 2-pin amphenol connector.: passo 0, immagine 3 di 3

Creating a 2-pin amphenol connector.

21. Cut 30 inches of red and black 16G wire (grey insulated wire). Strip 2 inches of the grey rubber coating from both ends.
22. Strip 0.5 inches from both the red and black wires from both ends.
23. Obtain a 2-pin amphenol connector.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.