Autosampler Battery Enclosure Assembly (For Old & New Versions)

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 14

Passo 14

Autosampler Battery Enclosure Assembly (For Old & New Versions), Connecting wires to the rocker switch.: passo 0, immagine 1 di 3

Autosampler Battery Enclosure Assembly (For Old & New Versions), Connecting wires to the rocker switch.: passo 0, immagine 2 di 3

Autosampler Battery Enclosure Assembly (For Old & New Versions), Connecting wires to the rocker switch.: passo 0, immagine 3 di 3

Connecting wires to the rocker switch.

33. This is what the wires look like threaded through the glands in the box.
34. Connect the battery wire to the first two prongs of the rocker switch.
35. Connect the 2-pin amphenol autosampler wire to the last two prongs of the rocker switch.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.