Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Carefully lift the cover slightly upwards Remove the switch It's only secured with a clip at one side and might fall off during handling, if not removed now. However, this step is - optional-
Lift back cover
  • Carefully lift the cover slightly upwards

  • Remove the switch

  • It's only secured with a clip at one side and might fall off during handling, if not removed now. However, this step is - optional-

  • Lift sideways and remove the two PCB connectors

  • Best use your fingernail or a soft plastic spudger to gently flip the black plastic on the side of the connector to the right until it flips over

  • Then gently pull the PCB to the left outwards without damaging it or bending it too sharply

  • Remove back cover completely

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.