Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 15

Passo 15
Replace the capacitors with the appropriate ones. Watch the polarity, match shorter leg side into hatched area Once the capacitors are inserted, bend the leads toward the logic board. This will ensure that the caps are tight to the board, it will also make it easier to solder them. Once they are soldered, cut the excess with a pair of side cutters or equivalent. All capacitors on this board are exchanged in the same way.
  • Replace the capacitors with the appropriate ones. Watch the polarity, match shorter leg side into hatched area

  • Once the capacitors are inserted, bend the leads toward the logic board. This will ensure that the caps are tight to the board, it will also make it easier to solder them.

  • Once they are soldered, cut the excess with a pair of side cutters or equivalent. All capacitors on this board are exchanged in the same way.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.