Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 14

Passo 14
The solder side shows the component to be desoldered C216    470uF 25V C213    680uF 25V C214    680uF 25V C212    680uF 25V C211    680uF 25V C215    470uF 25V     C217    220uF 25V C12    220uF 25V C11    220uF 25V Desolder each cap with a solder wick, or solder sucker. Logic board with all the caps removed. Note the hatched area on the logic board. This corresponds with the capacitors polarity marking. It is the negative lead, also has a shorter leg, that goes to the hatched area.
  • The solder side shows the component to be desoldered C216 470uF 25V C213 680uF 25V C214 680uF 25V C212 680uF 25V C211 680uF 25V C215 470uF 25V C217 220uF 25V C12 220uF 25V C11 220uF 25V

  • Desolder each cap with a solder wick, or solder sucker.

  • Logic board with all the caps removed. Note the hatched area on the logic board. This corresponds with the capacitors polarity marking. It is the negative lead, also has a shorter leg, that goes to the hatched area.

  • Clearly visible is the charred area on the logic board at the transformer side

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.