Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Remove the cable from the power button board. Again, a simple push connector, remove the cable with a gentle pull. Remove the seven Phillips screws. The screws are all 1/2" with the exception of the center screws, that one is 1/4" Remove the bottom sheet metal, this will leave the cage for the electronics. remove the three Phillips screws.
  • Remove the cable from the power button board. Again, a simple push connector, remove the cable with a gentle pull.

  • Remove the seven Phillips screws. The screws are all 1/2" with the exception of the center screws, that one is 1/4"

  • Remove the bottom sheet metal, this will leave the cage for the electronics. remove the three Phillips screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.