Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Disconnect all three antenna cables by prying each one straight up from its socket. Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it. To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.
  • Disconnect all three antenna cables by prying each one straight up from its socket.

  • Slide your tweezers or the flat end of your spudger underneath each cable until it's near the socket, and then gently twist or pry up to disconnect it.

  • To reconnect each cable, align the connector directly over its socket, and then press down so it snaps into place.

3つ全てのアンテナケーブルをソケットからまっすぐ引き抜いて、接続を外します。

ピンセットもしくはスパッジャーの平面側先端を各ケーブルの下に差し込んで、ソケット付近までスライドします。それから慎重に捻りながら、接続を外します。

各ケーブルを再接続するには、ソケット上に直接コネクタを揃えてから、カチッと音がするまで押さえます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.