Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 16

Passo 16
Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge). Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly. Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.
  • Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge).

  • Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.

T8トルクスドライバーを使って、4.9 mmヒンジ用ネジ(各ヒンジから1本ずつ)を計2本外します。

最上位のネジを最後に外してください。片手でMacBook Proをしっかりと固定します。2つのパーツが離れないように、予期せず倒れないようにご注意ください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.