Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Francese

Traduzione in corso passo 16

Passo 16
Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge). Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly. Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.
  • Use a T8 Torx driver to remove the two remaining 4.9 mm hinge screws (one from each hinge).

  • Remove the topmost screw last, using one hand to steady both halves of the MacBook Pro to make sure they don't separate and fall over unexpectedly.

Prenez un tournevis Torx T8 pour dévisser la dernière vis de 4,9 mm des charnières (une sur chacune).

Finissez par la vis du haut. Tenez en même temps les deux moitiés du MacBook Pro d'une main pour qu'elles ne séparent pas et ne tombent pas à l'improviste.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.