Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove these two triggers and springs from the backplate. Find which trigger goes on which side and put the springs in the trigger part facing towards the inside of the controller.
Preparing the triggers
  • Remove these two triggers and springs from the backplate.

  • Find which trigger goes on which side and put the springs in the trigger part facing towards the inside of the controller.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.