Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 1

Passo 1
Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera. Pry upwards to disconnect the connector from its socket. When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.
Disconnect the battery
  • Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.

  • Pry upwards to disconnect the connector from its socket.

  • When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.

  • Gently push the battery's flex cable away from the motherboard socket to prevent accidental contact.

将撬棒的扁平端插入电池接口下方,该电池接口连接至后置摄像头下方的主板。

向上撬以将连接器从其插座上断开。

当断开此类接口的连接时,请注意不要移动插座周围的小型表面安装组件。

轻轻将电池的柔性电缆推离主板插槽,以防止意外接触。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.