Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera. Pry upwards to disconnect the connector from its socket. When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.
Disconnect the battery
  • Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.

  • Pry upwards to disconnect the connector from its socket.

  • When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.

  • Gently push the battery's flex cable away from the motherboard socket to prevent accidental contact.

スパッジャーの平面側先端を使って、背面向きカメラの下のマザーボードに繋がったバッテリーコネクタの下に差し込みます。

コネクタをソケットからまっすぐ持ち上げて、接続を外します。

このようなコネクタの接続を外す際には、ソケットを囲む小さな表面実装コンポーネントを外さないように注意してください。

バッテリーのフレックスケーブルを慎重にマザーボードのソケットから押し出して、アクシデントで接触しないようにします。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.