Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Francese

Traduzione in corso passo 1

Passo 1
Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera. Pry upwards to disconnect the connector from its socket. When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.
Disconnect the battery
  • Insert the flat end of a spudger underneath the battery connector, which is attached to the motherboard below the rear-facing camera.

  • Pry upwards to disconnect the connector from its socket.

  • When you disconnect connectors like these, be careful not to dislodge the small surface-mounted components surrounding the socket.

  • Gently push the battery's flex cable away from the motherboard socket to prevent accidental contact.

Insérez l'extrémité plate d'une spatule sous le connecteur de la batterie, qui se trouve sur la carte mère, en dessous de la caméra arrière.

Faites levier vers le haut pour débrancher le connecteur de sa prise.

Quand vous débranchez des connecteurs comme celui-ci, faites attention à ne pas détacher les petits composants montés en surface autour de la prise.

Repliez délicatement la nappe de la batterie pour l'éloigner de sa prise sur la carte mère et éviter tout contact accidentel.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.