Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Remove the single screw on the right side of the LCD Board. (labeled in Yellow, We will remove the rest later in the teardown. There are three screws holding the Tray down to the bottom of the unit- Remove them Gently remove all connectors (6) in the image highlighted with red boxes
  • Remove the single screw on the right side of the LCD Board. (labeled in Yellow, We will remove the rest later in the teardown.

  • There are three screws holding the Tray down to the bottom of the unit- Remove them

  • Gently remove all connectors (6) in the image highlighted with red boxes

  • Turn the unit over. release the two clips on the underside and then the two on either side of the unit in order to Remove the Front Face.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.