Avviso: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto sulla guida che include questo passo.
Traduzione in corso passo 2
Passo 2
-
Work a guitar pick or opening tool around the edges of the back panel to disengage all clips.
-
There is adhesive around the edges of the back panel as well as around the camera.
-
Insert the hook of a Halberd spudger into the small opening above the plastic part covering the fingerprint sensor and pry it off while covering it so it doesn't go flying away.
-
Disconnect the fingerprint sensor flex cable with the flat end of a Halberd spudger or an opening pick and set the back panel aside.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.