Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 5

Passo 5
Use your Phillips #0 screwdriver to remove six 3.7mm screws from the motherboard. Use the same Phillips #0 screwdriver to remove one 3.2mm screw from the wireless card. Wiggle the motherboard gently out from the case. It should come out towards you and slightly to the right.
  • Use your Phillips #0 screwdriver to remove six 3.7mm screws from the motherboard.

  • Use the same Phillips #0 screwdriver to remove one 3.2mm screw from the wireless card.

  • Wiggle the motherboard gently out from the case. It should come out towards you and slightly to the right.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.