Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Before you can get to the motherboard, remove the three 4.6mm screws from the port cover using a Phillips #00 screwdriver. Before you can get to the motherboard, remove the three 4.6mm screws from the port cover using a Phillips #00 screwdriver. Before you can get to the motherboard, remove the three 4.6mm screws from the port cover using a Phillips #00 screwdriver.
  • Before you can get to the motherboard, remove the three 4.6mm screws from the port cover using a Phillips #00 screwdriver.

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.