Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
If your display glass is cracked, tape over the glass to prevent bodily harm and further breakage. This also makes a smooth surface allowing the suction cup to bond. Apply a suction cup as close to the SIM slot edge of the phone as you can while avoiding the curved edge.
  • If your display glass is cracked, tape over the glass to prevent bodily harm and further breakage. This also makes a smooth surface allowing the suction cup to bond.

  • Apply a suction cup as close to the SIM slot edge of the phone as you can while avoiding the curved edge.

  • The suction cup will not make a good seal on the curved portion of the glass.

ディスプレイのガラスにひびが入った場合は、けがをしたり、損傷が拡大しないようにガラスにテープを貼ります。これにより表面が平滑になり、吸盤が吸着しやすくなります。

できるだけスマートフォン端にあるSIMスロットの近くに吸盤を吸着させます。この際端部の曲面を避けて吸着させます。

ガラスのカーブした部分には、吸盤が十分に吸着しません。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.