Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Strong adhesive holds the screen in place. In order to separate it, you'll first need to heat and soften the adhesive using an iOpener, hair dryer, or heat gun.
Prepare an iOpener
  • Strong adhesive holds the screen in place. In order to separate it, you'll first need to heat and soften the adhesive using an iOpener, hair dryer, or heat gun.

  • You may need to reapply heat repeatedly throughout this process to prevent the adhesive from cooling and hardening.

  • Prepare an iOpener and place it on the bottom edge of the iPad's screen for about two minutes.

スクリーンを固定しているのは強力な接着剤です。まず最初に iOpenerを使って、接着剤を温めて柔らかくします。ヘアドライヤーもしくはヒートガンでも対応できます。

接着剤が冷却して硬くなることから、

ここに翻訳を挿入する

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.