Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 3

Passo 3
Flip the Lightning connector/logic board assembly back over to expose the top of the logic board. The display cable is lightly adhered to the top of the logic board. Use the flat end of a spudger to peel the display cable up from the logic board.
  • Flip the Lightning connector/logic board assembly back over to expose the top of the logic board.

  • The display cable is lightly adhered to the top of the logic board.

  • Use the flat end of a spudger to peel the display cable up from the logic board.

Lightningコネクタとロジックボードアセンブリを裏返して、ロジックボード上部が見えるようにします。

ディスプレイケーブルは、ロジックボード上部に緩く接続されています。

スパッジャーの平面側の先端を使い、ロジックボードからディスプレイケーブルをめくり上げます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.