Salta al contenuto principale

Sostituzione vetro posteriore Samsung Galaxy S9 Plus

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 7le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Samsung Galaxy S9 Plus Rear Glass Removal: passo 0, immagine 1 di 1
  • Switch off your phone.

  • Use an iOpener to loosen the adhesive beneath the rear glass. Apply the iOpener for at least two minutes. You might want to repeat this step several times during the back cover removal.

  • The adhesive of the Samsung Galaxy S9 Plus is very strong. A hair dryer, heat gun, or hot plate may also be used if you aren't able to open the device with the iOpener. Be careful not to overheat the phone—the AMOLED display and internal battery are both susceptible to heat damage.

Spegni il telefono.

Usa un iOpener per indebolire l'adesivo sotto il vetro posteriore. Applicalo per almeno due minuti. Può essere necessario ripetere quest'operazione diverse volte nel corso della rimozione della cover posteriore.

L'adesivo nel Samsung Galaxy S9 Plus è molto tenace. Se non riesci ad aprire il dispositivo con l'iOpener, puoi usare anche un asciugacapelli, una pistola termica o una piastra riscaldata. Stai attento a non surriscaldare il telefono: sia il display AMOLED sia la batteria interna sono sensibili al calore eccessivo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.