Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component. A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.
  • Apply a few drops of adhesive remover evenly along the elevated edge of your glued-down component.

  • A little bit goes a long way, so start with a very small amount. You can always add more later if needed. Applying the solvent in small amounts helps prevent unwanted leaks.

  • Wait 2-3 minutes for the liquid adhesive remover to penetrate and soften the adhesive before you proceed to the next step.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.